Stages of working with the new method
Posted: Sun Dec 22, 2024 9:15 am
Read about the use of BIM in the design of precast concrete structures in the article .
Working with the new reinforcement method includes the following steps:
Selecting a tool for reinforcement. As in the standard method, users first select a tool for distributing reinforcement. The difference saudi arabia email list is that now it is sufficient to select one standard size.
Assigning keys. Instead of selecting multiple sizes, the user assigns the desired keys to the reinforcement. For example, a key can include information about the diameter, reinforcement class, and design type.
Project design. All documentation is automatically updated according to the keys. There is no need to manually add specifications, as they are pulled up based on the data associated with the keys.
The new method significantly reduces the work time and increases the accuracy of the project. The main difference between the old and new reinforcement methods is the approach to managing the reinforcement sizes and specifications.
Earlier we wrote about methods of modeling reinforcement in Revit in a three-dimensional environment. Representatives of both medium and large design bureaus spoke about their experience of implementing 3D reinforcement .
Conclusion
At the end of the presentation, the speaker once again drew the attention of the audience to the fact that the new method of reinforcement using keys significantly simplifies the work of specialists. It allows to reduce the time for setting up reinforcement, reduce the number of errors and increase the efficiency of work.
Sergey Kovylin also noted that this method is an additional module to the main ADSK template, and does not replace it completely. The templates remain standard, but the new method can be added as a module to facilitate work with reinforcement.
Watch Sergey Kovylin's full presentation with detailed video examples of working with the old and new reinforcement methods in ADSK templates on one of the PRO TIM channels:
YouTube
VK Video
Rutube
Working with the new reinforcement method includes the following steps:
Selecting a tool for reinforcement. As in the standard method, users first select a tool for distributing reinforcement. The difference saudi arabia email list is that now it is sufficient to select one standard size.
Assigning keys. Instead of selecting multiple sizes, the user assigns the desired keys to the reinforcement. For example, a key can include information about the diameter, reinforcement class, and design type.
Project design. All documentation is automatically updated according to the keys. There is no need to manually add specifications, as they are pulled up based on the data associated with the keys.
The new method significantly reduces the work time and increases the accuracy of the project. The main difference between the old and new reinforcement methods is the approach to managing the reinforcement sizes and specifications.
Earlier we wrote about methods of modeling reinforcement in Revit in a three-dimensional environment. Representatives of both medium and large design bureaus spoke about their experience of implementing 3D reinforcement .
Conclusion
At the end of the presentation, the speaker once again drew the attention of the audience to the fact that the new method of reinforcement using keys significantly simplifies the work of specialists. It allows to reduce the time for setting up reinforcement, reduce the number of errors and increase the efficiency of work.
Sergey Kovylin also noted that this method is an additional module to the main ADSK template, and does not replace it completely. The templates remain standard, but the new method can be added as a module to facilitate work with reinforcement.
Watch Sergey Kovylin's full presentation with detailed video examples of working with the old and new reinforcement methods in ADSK templates on one of the PRO TIM channels:
YouTube
VK Video
Rutube